EPS Bio Technology EasyPlus mini Manual de usuario descargar pdf

1. Coding Your Meter

The display will show

“no CODE” the first

time batteries are

installed.

The meter is for

outside the body (in

vitro diagnostic use

only) use.

Quick Reference Guide

Manufacturer:

EPS Bio Technology Corp.

2F, No.49-2, Ln. 2, Guang-Fu Rd.,

Sec. 2, Hsinchu City, 30071 Taiwan.

Part No.718029700 Rev.A01

Self-Monitoring Blood Glucose System

mini

Insert the Code Card

into the slot. The

screen displays “OK”.

Please read the

User’s Manual and

Test Strip instructions

before test.

The code number

will be shown on the

display.

Make sure the code

number on the dis-

play matches the

code number on the

test strip bottle.

2. Running A Control

Solution Test

Make sure the code

number on the Code

Card matches the

code number on the

test strip bottle.

Insert the test strip

into the meter.

Replace the

bottle cap immedi-

ately after removing

a test strip from the

bottle.

Squeeze a tiny

drop on the strip’s

reaction zone.

Check if the read-

ing falls within the

range printed on

the test strip bottle.

3. Inserting A Lancet

into the Lancing Device

Take the cap off.

To disinfect the cap

after cleaning by plac-

ing it in 70% rubbing

alcohol for 10 minutes.

Allow the cap to air-dry

after disinfecting.

Insert the lancet

into the lancing

device firmly.

Twist off the

protective cover.

Please read the User’s Manual and Test Strip

Instructions before testing.

If you have any questions and/or need assis-

tance, please contact your healthcare pro-

fessional.

Select the desired

penetration depth.

Pull on the sliding

barrel of the lancing

device until it clicks

and then release.

IVD

0537

4. Alternative Site Test-

ing

This graphic shows

where the meter

cleared for alternative

site testing.

Check with your

healthcare professional

before test.

other sites

that not fingertip.

Massage the punc-

ture area of forearm

or palm for a few

minutes.

Press and hold the

lancing device with

one clear adjustable

tip against the fore-

arm.

If you choose the

palm, repeat the pre-

ceding three steps to

obtain a drop of blood

sample.

Press the trigger

button to activate the

lancing device.

Please do NOT use

the first drop of blood

sample.

Hold the device

against forearm or

palm and increase

pressure until the

blood sample size is

sufficient.

5. Testing Your Blood

Glucose

Insert the test strip

into the meter.

For accurate

results, wash your

hands with soap and

warm water. Rinse and

dry thoroughly.

Press the trigger

button to activate

the lancing device.

Replace the bottle

cap immediately

after removing a test

strip from the bottle.

Be sure to get enough

blood on the strip’s

reaction zone.

The result will appear on

the display after 5 sec-

onds.

Quick Reference Guide 1

Indice de contenidos

Pagina 1 - Quick Reference Guide

1. Coding Your Meter The display will show “no CODE” the first time batteries are installed. The meter is for outside the body (in vitro diagnosti

Mas documentos para No EPS Bio Technology EasyPlus mini

a Ver el documento EPS Bio Technology EasyPlus mini Manual de usuario

EPS Bio Technology EasyPlus mini Manual de usuario (56 paginas)

EPS Bio Technology EasyPlus mini Manual de usuario (45 paginas)

Comentarios a estos manuales

Sin comentarios

EPS Bio Technology EasyPlus mini Manual de usuario

Busca en linea o descarga Manual de usuario para No EPS Bio Technology EasyPlus mini. I-D-I0275 EasyPlus mini QRG E (B).ai Manual de usuario

Indice de contenidos

Mas documentos para No EPS Bio Technology EasyPlus mini

Comentarios a estos manuales

Relacionado con productos y manuales para No EPS Bio Technology EasyPlus mini